User Documentation

Wi-Fi device IE-WL-BL-AP-CL Web Console Configuration
3-44
AeroLink protection state
The AeroLink protection state changes.
AeroLink states: Initialize (init)/ Discovery/ Idle/ Negotiation
(nego)/ Back up/ Active/ Changed/ Undefined (undef)
Configuration-related events
Event is triggered when…
Configuration Changed
A configuration item has been changed.
Configuration file import via Web Console
The configuration file is imported to the IE-WL-BL-AP-CL.
Console authentication failure
An incorrect password is entered.
Firmware upgraded
The device’s firmware is updated.
Loaded the configuration from
EBR-MODULE RS232
The configuration is successfully loaded/there is an error loading
the configuration from EBR-MODULE RS232.
Saving configuration to EBR-MODULE
RS232
The configuration is successfully saved/there is an error saving the
configuration to EBR-MODULE RS232.
EBR-MODULE RS232 failure
IE-WL-BL-AP-CL cannot detect an EBR-MODULE RS232 at the
console port.
Configuration reset to default
The configuration is reset to factory default.
Power events
Event is triggered when…
Power 1/2 transition (On -> Off)
The IE-WL-BL-AP-CL is powered down in PWR1/2.
PoE transition (On -> Off)
The IE-WL-BL-AP-CL is powered down in PoE.
Power 1/2 transition (Off -> On)
The IE-WL-BL-AP-CL is powered via PWR1/2.
PoE transition (Off -> On)
The IE-WL-BL-AP-CL is powered via PoE.
Syslog
This function provides the event logs for the Syslog server. The function supports up to three configurable
Syslog servers and Syslog server UDP port numbers. When an event occurs, the event will be sent as a Syslog
UDP packet to the specified Syslog servers.
Syslog Event Types
The event type groups are shown on this page. Select the Enable Logging checkbox next to the event type to
enable logging of the event. By default, all event types are enabled (checked).
Syslog Server Settings
You can configure the parameters for your Syslog servers in this page.