User Documentation

Wi-Fi device IE-WL-BL-AP-CL Web Console Configuration
3-38
Maximum number of users
Setting
Description
Factory Default
1 to 999
Specifies how many IP address can be assigned continuously
None
Client lease time
Setting
Description
Factory Default
2 to 14400 minutes
The lease time for which an IP address is assigned. The IP
address expires after the lease time is completed.
14400 minutes
(10 days)
Packet Filters
The IE-WL-BL-AP-CL includes various filters for IP-based packets going through LAN and WLAN interfaces.
You can set these filters as a firewall to help enhance network security.
MAC Filters
The IE-WL-BL-AP-CL’s MAC filter is a policy-based filter that can allow or filter out IP-based packets with
specified MAC addresses. The IE-WL-BL-AP-CL provides 8 entities for setting MAC addresses in your filtering
policy. Remember to check the Active check box for each entity to activate the setting.
MAC filters
Setting
Description
Factory Default
Enable
Enables MAC filters
Disable
Disable
Disables MAC filters
Policy
Setting
Description
Factory Default
Accept
Only the packets fitting the entities on list can be allowed.
Drop
Drop
Any packet fitting the entities on list will be denied.
ATTENTION
Be careful when you enable the filter function:
Drop + “no entity on list is activated” = all packets are allowed
Accept + “no entity on list is activated” = all packets are denied
IP Protocol Filters
The IE-WL-BL-AP-CL’s IP protocol filter is a policy-based filter that can allow or filter out IP-based packets with
specified IP protocol and source/destination IP addresses.