User Documentation

Wi-Fi device IE-WL-BL-AP-CL Web Console Configuration
3-22
Primary/ Secondary DNS server
Setting
Description
Factory Default
IP address of the
Primary/Secondary
DNS server
The IP address of the DNS Server used by your network. After
entering the DNS Server’s IP address, you can input the
device’s URL (e.g., http://ap1.weidmueller.com) in your
browser’s address field instead of entering the IP address. The
Secondary DNS server will be used if the Primary DNS server
fails to connect.
None
System Time
The IE-WL-BL-AP-CL has a time calibration function based on information from an NTP server or user specified
Date and Time information. Functions such as Logs and Notifications can add real-time information to the
message.
The Current local time shows the device’s system time when you open this web page. You can click on the Set
Time button to activate the updated date and time parameters. An “(Updated)” string is displayed, which
indicates that the change is complete. Local system time will be immediately activated in the system without
running Save and Restart.
NOTE
The device has a built-in real-time clock (RTC). We strongly recommend that users update the Current local
time for the device after the initial setup or a long-term shutdown, especially when the network does not have
an Internet connection for accessing the NTP server or there is no NTP server on the LAN.
Current local time
Setting
Description
Factory Default
User adjustable time
The date and time parameters allow configuration of the local
time, with immediate activation.
Use 24-hour format: yyyy/mm/dd hh:mm:ss
None
Time zone
Setting
Description
Factory Default
User selectable time
zone
The time zone setting allows conversion from GMT (Greenwich
Mean Time) to local time.
GMT (Greenwich
Mean Time)
ATTENTION
Changing the time zone will automatically adjust the Current local time. You should configure the Time
zone before setting the Current local time.