User Documentation

Wi-Fi device IE-WL-BL-AP-CL Getting Started
2-15
How to Test Two or More IE-WL-BL-AP-CL Units
If you have two or more IE-WL-BL-AP-CL units, you will need a second notebook computer (Notebook B)
equipped with an Ethernet port. Use the default settings for the first Wi-Fi device connected to notebook A and
change the second or third IE-WL-BL-AP-CL connected to notebook B to Client mode, and then configure the
notebooks and IE-WL-BL-AP-CL units properly.
After setting up the testing environment, open a DOS window on notebook B. At the prompt, type:
ping <IP address of notebook A>
and then press Enter. A “Reply from IP address …” response means the communication was successful. A
“Request timed out” response means the communication failed. In this case, recheck the configuration to make
sure the connections are correct.