User Documentation

- 9 -

Cable Holder Installation (Optional)

You can attach the cable holder to the bottom of the wireless device. This helps to

keep cabling neat and avoid accidents that result from untidy cables.

STEP 1: Screw the cable holder onto the bottom of the

IE-WL-AP-BR-CL-ABG.

STEP 2: After mounting the IE-WL-AP-BR-CL-ABG and plugging in the LAN cable,

tighten the cable along the device and wall.

Communication Connections

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) ports located on the IE-WL-AP-BR-CL-ABG’s front panel are

used to connect to Ethernet-enabled devices.

The pinouts for both MDI (NIC-type) ports and MDI-X (HUB/Switch-type) ports are

shown below.

MDI Port Pinouts

MDI-X Port Pinouts

8-pin RJ45

Signal

Tx+

Rx+

Tx-

Rx-

Rx+

Tx+

Rx-

Tx-