User Documentation
- 12 - 
Specifications 
WLAN 
Standards   
IEEE 802.11a/b/g for Wireless LAN 
IEEE 802.3u 10/100BaseT(X) for Ethernet LAN 
IEEE 802.3af for Power-over-Ethernet 
IEEE 802.1D/w STP/RSTP 
Spread Spectrum and 
Modulation 
DSSS with DBPSK, DQPSK, CCK 
OFDM with BPSK, QPSK, 16QAM, 64QAM 
Operating Channels 
(Central Frequency) 
US:  2.412 to 2.462 GHz (11 channels) 
  5.18 to 5.24 GHz (4 channels) 
EU:  2.412 to 2.472 GHz (13 channels) 
  5.18 to 5.24 GHz (4 channels) 
Security 
64-bit and 128-bit WEP encryption, WPA /WPA2 (IEEE 
802.1X/ RADIUS, TKIP and AES) 
Transmission Rates 
802.11b: 1, 2, 5.5, 11 Mbps 
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 
Protocol 
General Protocols: 
Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, 
TCP, UDP, RADIUS, SNMP, RTP 
AP-only Protocols: 
ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w) 
TX Transmit Power (for hardware revision 1.2) 
802.11b: 
Typ. 23±1.5 dBm @ 1 to 11 Mbps 
802.11g: 
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 
36 Mbps, 
Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 
Mbps 
802.11a: 
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 
36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps 
RX Sensitivity (for hardware revision 1.2): 
802.11b: 
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 
5.5 Mbps, -90 dBm @ 11 Mbps 
802.11g: 
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 
12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, 
-80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 
54 Mbps 
802.11a: 
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 
12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, 
-79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 
54 Mbps 
Interface 
Default Antenna 
2dBi dual-band, Omni-directional antenna 
Antenna Connector 
RP-SMA (female) 
Connection 
10-pin Removable Terminal Block 
Alarm Contact 
1 relay output (capacity: 1A @24VDC) 
Digital Input 
2 electrically-isolated inputs 
•  3 to -30V for state “0” (OFF) 
•  13 to 30V for state “1” (ON) 
•  Max. input current: 8 mA 
Console 
RS-232 (RJ45 type) 
LAN Port 
10/100BaseT(X) auto negotiation speed 
LED Indicators 
PWR1, PWR2, PoE, FAULT, STATE, Signal Strength, 
CLIENT, MODE, BRIDGE MODE, WLAN, 10M, 100M 










