User Documentation

- 11 -
LED Indicators
The front panel of Weidmüller’s IE-WL-AP-BR-CL-ABG contains several LED
indicators. The function of each LED is described in the table below.
LED
Color
State
Description
Front Panel LED Indicators (System)
PWR1
Green
On
Power is being supplied from power input 1.
Off
Power is not being supplied from power
input 1.
PWR2
Green
On
Power is being supplied from power input 2.
Off
Power is not being supplied from power
input 2.
PoE
Amber
On
Power is being supplied via PoE.
Off
Power is not being supplied via PoE.
FAULT
Red
Blink
(slow)
Cannot get an IP address from the DHCP
server (interval: 1 sec)
Blink
(fast)
IP address conflict (interval: 0.5 sec)
Off
Error condition does not exist.
STATE
Green/Red
Green
Software Ready
Green
Blink
The IE-WL-AP-BR-CL-ABG has been
located by Weidmüller WLAN Administrator.
(interval: 1sec)
Red
Booting error condition
SIGNAL
(5 LEDs)
Green
On
Signal level
(for Client mode only)
Off
BRIDGE
MODE
Green
On
IE-WL-AP-BR-CL-ABG functions in Bridge
Mode.
Off
IE-WL-AP-BR-CL-ABG is not in Bridge
Mode.
CLIENT
MODE
Green
On
IE-WL-AP-BR-CL-ABG functions in Client
Mode.
Off
IE-WL-AP-BR-CL-ABG is not in Client
Mode.
WLAN
Amber
On
WLAN is in used
Off
WLAN is not in use
TP Port LED Indicators (Port Interface)
100M
Green
On
TP port’s 100Mbps link is active.
Blink
Data is being transmitted at 100 Mbps
Off
TP port’s 100Mbps link is inactive.
10M
Yellow
On
TP port’s 10Mbps link is active.
Blink
Data is being transmitted at 10 Mbps
Off
TP port’s 10Mbps link is inactive.