User Documentation

IE-WL-AP-BR-CL-ABG Introduction
1-4
Interface
Default Antenna: 2 dBi dual-band omni-directional antenna, RP-SMA (male)
Connector for External Antennas: RP-SMA (female)
LAN Ports: 1, 10/100BaseT(X), auto negotiation speed (RJ45-type)
Console for External Antenna: RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, signal strength, CLIENT MODE, BRIDGE MODE, WLAN,
10M, 100M
Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, providing IP30 protection
Weight: 850 g
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3a
f
compliant)
Connector: 10-pin removable terminal block
Power Consumption:
• 0.121 to 0.494 A @ 12 to 48 VDC
• 0.3 A @ 24 VDC
Reverse Polarity Protection: Present
Regulatory Approvals
Safety: EN60950-1, UL60950-1
Radio: EN300 328, EN301 893
EMC: EN301 489-1/-17, FCC Part 15, EN55022/55024, IEC61000-6-2/-4
Hazardous Location: UL/cUL Class I, Div. 2; ATEX Class I, Zone 2
Warranty
Warranty Period: 5 years
ATTENTION
The IE-WL-AP-BR-CL-ABG is NOT a portable mobile device and should be located at least 20 cm away from
the human body.
The IE-WL-AP-BR-CL-ABG is NOT designed for the general public. A well-trained technician should be
enlisted to ensure safe deployment of IE-WL-AP-BR-CL-ABG units, and to establish a wireless network.