User Documentation
IE-WL-AP-BR-CL-ABG Web Console Configuration
3-10
NOTE
If the Gateway field in Basic Settings Æ Network Settings is empty, a warning message will appear,
reminding you to set the default gateway when Client mode is enabled. You can ignore this message if you
are only planning a local network and packets will not be sent outside the network.
RF type
Setting Description Factory Default
A Supports IEEE802.11a standard only
B Supports IEEE802.11b standard only
G Supports IEEE802.11g standard only
B/G Mixed Supports both of IEEE802.11b/g standards, but 802.11g can be
slowed down when 802.11b clients are on the network
B/G Mixed
Channel (for AP/Master mode only)
Setting Description Factory Default
Available channels vary
with RF type
IE-WL-AP-BR-CL-ABG plays a role of wireless AP. 6 (in B/G Mixed
mode)
SSID
Setting Description Factory Default
Max. of 31
characters
The SSID of a client and the SSID of the AP must be identical for
the client and AP to be able to communicate with each other.
Weidmueller
SSID broadcast (for AP/Master mode only)
Setting Description Factory Default
Enable/ Disable SSID can be broadcast or not Enable
NOTE
The IE-WL-AP-BR-CL-ABG-EU (for European frequency bands) only connects SSID-hidden APs in all
IEEE802.11b/g channels.
WDS (for AP mode only)
Setting Description Factory Default
Enable/Disable IE-WL-AP-BR-CL-ABG supports WDS or not. Disable