User Documentation

IE-WL-AP-BR-CL-ABG Web Console Configuration
3-4
Click on SSID for more detailed 802.11 information, as shown in the following figure.
NOTE
The 802.11 info that is displayed may be different for different operation modes. For example, “Current
BSSID” is not available in Client mode, and “Signal strength” is not available in AP mode.
Basic Settings
The Basic Settings group includes the most commonly used settings required by administrators to maintain and
control the IE-WL-AP-BR-CL-ABG.
System Info Settings
The System Info items, especially Device name and Device description, are displayed and included on the
Overview page, in SNMP information, and in alarm emails. Setting System Info items makes it easier to
identify the different IE-WL-AP-BR-CL-ABG units connected to your network.
Device name
Setting Description Factory Default
Max. 31 of
characters
This option is useful for specifying the role or
application of different IE-WL-AP-BR-CL-ABG units.
IE-WL-AP-BR-CL-ABG
_
<Serial
No. of this
IE-WL-AP-BR-CL-ABG>
Device location
Setting Description Factory Default
Max. of 31 characters Specifies the location of different IE-WL-AP-BR-CL-ABG units. None