User Documentation

IE-WL-AP-BR-CL-ABG Getting Started
2-4
How to Test Two or More IE-WL-AP-BR-CL-ABG Units
If you have two or more IE-WL-AP-BR-CL-ABG units, you will need a second notebook computer (Notebook B)
equipped with an Ethernet port. Use the default settings for the first IE-WL-AP-BR-CL-ABG connected to
notebook A and change the second or third IE-WL-AP-BR-CL-ABG connected to notebook B to Client mode, and
then configure the notebooks and IE-WL-AP-BR-CL-ABG units properly.
After setting up the testing environment, open a DOS window on notebook B. At the prompt, type:
ping <IP address of notebook A>
and then press Enter. A “Reply from IP address …” response means the communication was successful. A
“Request timed out” response means the communication failed. In this case, recheck the configuration to make
sure the connections are correct.