User Documentation

- 16 -
Specifications
Technology
Standards
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3x for Flow Control
Forward and Filtering
Rate
148,810 pps (100Mbit), 14,881 pps (10Mbit)
Packet Buffer Memory 1.25 Mbit
Processing Type
Store and Forward, with IEEE802.3x full duplex,
back pressure flow control
MAC-address Table
Size
4K uni-cast addresses
Interface
RJ45 Ports
10/100BaseT(X) auto negotiation speed, F/H
duplex mode and auto MDI/MDI-X connection
Fiber Ports 100BaseFX ports (SC/ST connector)
LED Indicators
PWR1, PWR2 (Power), 10/100M (TP-Port) and
100M (Fiber port)
DIP Switches Enable/disable broadcast storm protection
Alarm Contact
One relay output with current carrying capacity
of 1A @ 24 VDC
Optical Fiber
100Base FX
Multi
-
mode
Fiber Cable Type OM1
50/125 µm
800 MHz*Km
Typical Distance 4 km 5 km
Wavelength
Typical (nm) 1300
TX Range (nm) 1260 to 1360
RX Range (nm) 1100 to 1600
Optical Power
TX Range (dBm) -10 to -20
RX Range (dBm) -3 to -32
Link Budget (dB) 12
Dispersion Penalty
(dB)
3
Typical Distance: To reach the typical distance of a specified fiber
transceiver, please refer to the following formula: Link budget(dB) >
dispersion penalty(dB) + total link loss(dB).
Power
Input Voltage 12/24/48 VDC (9.6 to 60 VDC),
2 redundant inputs
Input Current @ 24
VDC
0.34 A (IE-SW-VL16-16TX)
0.39 A (IE-SW-VL16-14TX-2SC/2ST)
Connection One removable 6-pin terminal block
Inrush current Max. 6.3A @ 24VDC (0.1 - 1ms)
Overload Current
Protection
Present
Reverse Polarity
Protection
Present
Physical Characteristics
Housing IP30 protection, metal case
Dimension
(W x H x D)
80.5 x 135 x 105 mm
Weight 1,140 g
Installation DIN-rail, Wall Mounting (with optional kit)