User Documentation

User Manual Managed Switches

NOTE: Before accessing the Switch’s web browser interface, first connect one of its

RJ45 Ethernet ports to your Ethernet LAN, or directly to your PC's Ethernet card (NIC).

You can establish a connection with either a straight-through or cross-over Ethernet

cable.

NOTE: The Weidmüller switch’s default IP address is 192.168.1.110.

The default password is Detmold

After making sure that the Weidmüller switch is connected to the same LAN and logical subnet as

your PC, open the switch’s web console as follows:

Open your web browser and type the Switch’s IP address in the Address or URL field. Press Enter

to establish the connection.

The web login page will open. Select the login account (admin or user) and enter the default

Password “Detmold” (this is the same as the serial console or telnet password), and then click Login

to continue. Leave the Password field blank if a password has not been set.

After logging in, you may need to wait a few moments for the web console to appear. Use the menu

tree in the left navigation panel to open the function pages to access each of Ethernet Switch's

functions.