User Documentation

User Manual Managed Switches
8
The Communication Parameter for console connection are:
115200 for Baud Rate, 8 for Data Bits, None for Parity, 1 for Stop Bits, and None for Flow control.
Click OK to continue.
Type 1 to select ansi/VT100 terminal type, and then press Enter.
The Console login screen will appear. Press Enter to open the Account pop-up selector and then
select either admin (read/write access) or user (read access only). Use the keyboard’s down arrow
to move the cursor to the Password field, enter the default Console Password “Detmold”. This
password will be required to access any of the consoles (web, serial, Telnet). Leave the Password
field blank if a console password has not been set), and then press Enter.