User Documentation

User Manual Managed Switches
100
IGMP Snooping Enable
Setting
Description
Factory
Default
Enable/Disable
Checkmark the IGMP Snooping Enable checkbox to
enable the IGMP Snooping function globally.
Disabled
Query Interval
Setting
Description
Factory
Default
Numerical value,
input by the user
Sets the query interval of the Querier function globally.
Valid settings are from 20 to 600 seconds.
125 seconds
IGMP Snooping Enhanced Mode
Setting
Description
Factory
Default
Enable
IGMP Multicast packets will be forwarded to:
• Auto-Learned Multicast Querier Ports
• Member Ports
Disable
Disable
IGMP Multicast packets will be forwarded to:
• Auto-Learned Multicast Router Ports
• Static Multicast Querier Ports
• Querier Connected Ports
• Member Ports
IGMP Snooping
Setting
Description
Factory
Default
Enable/Disable
Enables or disables the IGMP Snooping function on
that particular VLAN.
Enabled if
IGMP
Snooping is
enabled
globally
NOTE: We suggest the following IGMP Snooping configuration settings:
When the network is mixed with third party switches, such as Cisco:
• “IGMP Snooping Enable”  Enable
• “IGMP Snooping Enhanced Mode”  Disable
When the network consists entirely of Weidmüller switches:
• “IGMP Snooping Enable”  Disable
• “IGMP Snooping Enhanced Mode”  Enable