User Documentation

User Manual Managed Switches
87
Inspect COS – Type 2
Setting
Description
Factory
Default
Enable/Disable
Enables or disables the Weidmüller Switch for
inspecting 802.1p COS tags in the MAC frame to
determine the priority of each frame.
Enabled
NOTE: The designer can enable these classifications individually or in combination. For
instance, if a “hot” higher priority port is required for a network design, “Inspect TOS” and
“Inspect CoS” can be disabled. This setting leaves only port default priority active, which
results in all ingress frames being assigned the same priority on that port.
3.6.2.2 CoS Mapping
CoS Value and Priority Queues
Setting
Description
Factory Default
Low/Normal/
Medium/High
Maps different CoS values to 4
different egress queues.
0: Low
1: Low
2: Normal
3: Normal
4: Medium
5: Medium
6: High
7: High
3.6.2.3 ToS/DiffServ Mapping