User Documentation

User Manual Managed Switches
156
2. Change the IP address of the PC to one of the rang 192.168.1.0 / 24 (e.g. IP address
192.168.1.200 / Subnet mask 255.255.255.0)
3. Start a Web browser and log into the Web interface of the Switch (default IP address of the
switch is 192.168.1.110)
Username: admin / Password: Detmold
4. Select menu Industrial Protocol -> Ethernet/IP
5. Select Enable option and click Activate to enable Ethernet/IP.
With EtherNet/IP enabled, IGMP Snooping and IGMP Query functions will be enabled automatically
to be properly integrated in Rockwell systems for multicast Implicit (I/O) Messaging.
Ethernet/IP functionality is implemented in firmware version 3.3.x and later.
If you use a managed Switch with firmware version 2.x you can update the firmware to latest
version 3.3.x. Your hardware already is capable to run the industrial protocols.
By factory default the Ethernet/IP functionality is disabled (all Weidmüller managed
Switches). EtherNet/IP functionality can only be enabled, if Profinet functionality is
disabled.
4.3.2 CIP Objects of EtherNet/IP
Several communication objects are defined in CIP (Common Industrial Protocol). Weidmüller
switches support the following objects for PLCs and SCADA systems to monitor:
• Identity Object
• TCP/IP Interface Object
• Ethernet Link Object
• Assembly Object
• Message Router Object
• Connection Manager Object
• Port Object
• Weidmüller Networking Object (Vendor Specific)