User Documentation

User Manual Managed Switches
124
NOTE: Certain tolerances exist between real data and measured data.
Parameters
Tolerance
Temperature (°C)
± 3°C
Voltage (V)
± 0.1V
Tx power (dBm)
± 3dB
Rx power (dBm)
± 3dB
3.15 Using the MAC Address Table
This section explains the information provided by the Weidmüller switch’s MAC address table.
The MAC Address table can be configured to display the following Weidmüller switch MAC address
groups, which are selected from the drop-down list:
ALL
Select this item to show all of the Weidmüller switch’s MAC addresses.
ALL Learned
Select this item to show all of the Weidmüller switch’s Learned MAC
addresses.
ALL Static Lock
Select this item to show all of the Weidmüller switch’s Static Lock MAC
addresses (not supported by Value Line managed Switches).
ALL Static
Select this item to show all of the Weidmüller switch’s Static, Static Lock,
and Static Multicast MAC addresses.
ALL Static
Multicast
Select this item to show all of the Weidmüller switch’s Static Multicast
MAC addresses.
Port n
Select this item to show all of the MAC addresses dedicated ports.
The table displays the following information:
MAC
This field shows the MAC address.
Type
This field shows the type of this MAC address.