User Documentation

User Manual Managed Switches
109
3.10.2 Event Types
Event Types can be divided into two basic groups: System Events and Port Events. System Events
are related to the overall function of the switch, whereas Port Events are related to the activity of a
specific port.
System Events
Warning e-mail is sent when…
Switch Cold Start
Power is cut off and then reconnected.
Switch Warm Start
Weidmüller switch is rebooted, such as when network
parameters are changed (IP address, subnet mask, etc.).
Power Transition (OnOff)
Weidmüller switch is powered down.
Power Transition (OffOn)
Weidmüller switch is powered up.
DI1 (OnOff)
Digital Input 1 is triggered by on to off transition
DI1 (OffOn)
Digital Input 1 is triggered by off to on transition
DI2 (OnOff)
Digital Input 2 is triggered by on to off transition
DI2 (OffOn)
Digital Input 2 is triggered by off to on transition
Configuration Change
Activated
Any configuration item has been changed.
Authentication Failure
An incorrect password was entered.
Comm. Redundancy
Topology Changed
If any Spanning Tree Protocol switches have changed their
position (applies only to the root of the tree).
If the Master of the Turbo Ring has changed or the backup path
is activated.
Port Events
Warning e-mail is sent when…
Link-ON
The port is connected to another device.
Link-OFF
The port is disconnected (e.g., the cable is pulled out, or the
opposing device shuts down).