User Documentation

User Manual Managed Switches
19
NOTE: The Switch's default Password is ”Detmold”. If this Password is changed,
then you will be required to type the new Password when logging into the serial
console, Telnet console, or Web console.
Account
Setting
Description
Factory
Default
admin
This account can modify the Weidmüller
switch’s configuration.
admin
user
This account can only view the Weidmüller
switch’s configurations.
Password
Setting
Description
Factory
Default
Old password
(max. 16
characters)
Enter the current password
Detmold
New password
(Max. 16
characters)
Enter the desired new password. Leave it blank
if you want to remove the password.
None
Retype password
(Max. 16
characters)
Enter the desired new password again. Leave it
blank if you want to remove the password.
None
3.1.3 Accessible IP List
The Weidmüller switch uses an IP address-based filtering method to control access to the device.