User Documentation

User Manual Managed Switches
48
After port trunking has been activated, you can configure these settings again for each trunking port.
3.2.1 Port Trunking Settings
The Port Trunking Settings page is used to assign ports to a Trunk Group.
Step 1: Select the desired Trunk Group (Trk1, Trk2, Trk3, Trk4) from the drop-down box .
Step 2: Select Static, or LACP from the Trunk Type drop-down box.
Step 3: Select the desired ports under Available Ports and click Up to add to the Trunk group.
Step 4: Select the desired ports under Member Ports and click Down to remove from the group.
Trunk Group (maximum of 4 trunk groups)
Setting
Description
Factory
Default
Trk1, Trk2, Trk3,
Trk4
Specifies the current trunk group
Trk1
Trunk Type
Setting
Description
Factory
Default
Static
Selects proprietary trunking protocol
Static
LACP
Selects LACP (IEEE 802.3ad, Link Aggregation
Control Protocol).
Static