User Documentation

User Manual Managed Switches
143
2. When the Edit Ethernet Node dialog box appears, click
Browse
3. Select your target switch and click
OK
4. Assign IP address and Device name to the switch
 Give the switch an IP address and subnet mask
(e.g. 192.168.0.110, 255.255.255.0)
 Click Assign IP configuration
 Give the switch a name (e.g. IE-SW-VL08MT-8TX)
 Click Assign Name
 Click Close to finish
NOTE
The field Device name does not allow any empty spaces in the name. If the device name is entered
with a space, the system will remove words after the space automatically.