User Documentation

User Manual Managed Switches
113
Power Transition (On ->
Off)
Weidmüller switch is powered down
Power Transition (Off ->
On)
Weidmüller switch is powered up
DI1 (OnOff)
Digital Input 1 is triggered by on to off transition
DI1 (OffOn)
Digital Input 1 is triggered by off to on transition
DI2 (OnOff)
Digital Input 2 is triggered by on to off transition
DI2 (OffOn)
Digital Input 2 is triggered by off to on transition
Turbo Ring Break
The Turbo Ring is broken. Only the MASTER switch of Turbo
Ring will output warning relay.
Port Events
Warning e-mail is sent when…
Link-ON
The port is connected to another device.
Link-OFF
The port is disconnected (e.g., the cable is pulled out, or the
opposing device shuts down).
Traffic-Overload
The port’s traffic surpasses the Traffic-Threshold for that port
(provided this item is Enabled).
Traffic-Threshold (%)
(0 to 100 %)
Enter a nonzero number if the port’s Traffic-Overload item is
Enabled.
Traffic-Duration (sec.)
(1 to 300 sec.)
A Traffic-Overload warning is sent every Traffic-Duration seconds
if the average Traffic-Threshold is surpassed during that time
period.
NOTE: The Traffic-Overload, Traffic-Threshold (%), and Traffic-Duration (sec) Port
Event items are related. If you Enable the Traffic-Overload event, then be sure to enter a
non-zero Traffic-Threshold percentage, as well as a Traffic-Duration between 1 and 300
seconds.
Override relay alarm settings
Select this option to override the relay warning setting temporarily. Releasing the relay output will
allow administrators to fix any problems with the warning condition.
Warning List
The Current Warning List can be used to see if any relay alarms have been issued.