User Documentation

User Manual Managed Switches
110
Traffic-Overload
The port’s traffic surpasses the Traffic-Threshold for that port
(provided this item is Enabled).
Traffic-Threshold (%)
(0 to 100 %)
Enter a non-zero number if the port’s Traffic-Overload item is
Enabled.
Traffic-Duration (sec.)
(1 to 300 sec.)
A Traffic-Overload warning is sent every Traffic-Duration
seconds if the average Traffic-Threshold is surpassed during
that time period.
NOTE: The Traffic-Overload, Traffic-Threshold (%) and Traffic-Duration (sec) Port Event
items are related. If the Traffic-Overload event is enabled, then ensure to set a nonzero
Traffic-Threshold percentage, as well as a Traffic-Duration between 1 and 300 seconds.
NOTE: If a warning mail is sent by the Switch the sender mail address automatically is
created by combination of the parameters “Switch Name”, “Location” (Menu Basic settings
 System) and character “@”.
Format of sender mail address: < Switch Name>@< Switch Location>.
If mail warnings will be used please ensure that the combination of parameters “Switch
Name” and “Location” results to be a valid mail address. For this reason the parameter
“Switch Name” must be a vaild mail prefix and the parameter “Location” has to be
configured like to be a domain name.
Example: Switch Name = Managed_Switch and Location = myDepartment.de
Automatically created sender mail address = [e-mail]
► Do not use blanks or special characters for both parameters which would result in an
unvalid mail address otherwise the receiving mail server would not accept the warning
mail.
3.10.3 Email Settings