User Documentation

User Manual Managed Switches
9
The Main Menu of the Switch´s serial console will be displayed.
After entering the Main Menu, use the following keys to move the cursor, and to select options.
Key
Function
Up/Down/Left/Right arrows, or Tab
Move the onscreen cursor
Enter
Display & select options
Space
Toggle options
Esc
Previous Menu
2.2 Configuration by Telnet Console
Opening the Weidmüller switch’s Telnet or web console over a network requires that the PC host and
Weidmüller switch are on the same logical subnet. You may need to adjust your PC host’s IP address
and subnet mask. By default, the Weidmüller switch’s IP address is 192.168.1.110 and the switch’s
subnet mask is 255.255.255.0 (for a Class C network). If you do not change these values, and your
PC host's subnet mask is 255.255.255.0, then its IP address must have the form 192.168.1.xxx
NOTE: When connecting to the switch’s Telnet or web console ensure that your
PC host and the switch are on the same logical subnet.
NOTE: When connecting to the switch’s Telnet or web console, first connect one of
the switch’s Ethernet ports to your Ethernet LAN or directly to your PC’s Ethernet
port. You may use either a straight-through or cross-over Ethernet cable.
NOTE: The Weidmüller switch’s default IP address is 192.168.1.110
The default password is Detmold