Approval/Certificate/Document of Conformity

[13]
Schedule
[14] TYPE EXAMINATION CERTIFICATE No.
DEMKO 11 ATEX 150193X Rev. 7
00-IC-F0060-1 – Issue 14.0
This certificate may only be reproduced in its entirety and without any change, schedule included. Page 2 of 3
[15] Description of Product:
Series Models IE-SW-BL05 and Series Models IE-SW-BL08 are open type communication interface units and are intended for use in
industrial automation applications. They are microcomputer-based and communicate via interfaces through wire. These devices are open-
type devices intended for installation in an ultimate enclosure. Model IE-SW-BL05 consists of one circuit board (main board) while the IE-
SW-BL08 Models consist of two circuit boards (the main board, same board as the Model IE-SW-BL05, and a communication board). The
subject models utilize the “nA" protection method for the switches utilized.
The optical radiation output of the product with respect to explosion protection, according to Annex II clause 1.3.1 of the Directive
2014/34/EU is not covered in this certificate.
Model Differences
IE-SW-BL08(X)-7TX-1SCS
IE-SW-BL08(X)-7TX-1SC
IE-SW-BL08(X)-7TX-1ST
Ethernet RJ45
Seven provided
Seven provided
Seven provided
Fiber (S.M.)
One provided
N/A
N/A
Fiber (M.M.)
N/A
One provided
One provided
IE-SW-BL08(X)-8TX IE-SW-BL08(X)-6TX-2SC IE-SW-BL08(X)-6TX-2ST IE-SW-BL08(X)-6TX-2SCS
Ethernet RJ45
Eight provided
Six provided
Six provided
Six provided
Fiber (M.M, ST)
N/A
N/A
Two provided
N/A
Fiber (M.M, SC)
N/A
Two provided
N/A
N/A
Fiber (S.M, SC)
N/A
N/A
N/A
Two provided
IE-SW-BL05(X)-5TX
IE-SW-BL05(X)-4TX-1SC
IE-SW-BL05(X)-4TX-1ST
IE-SW-BL05(X)-4TX-1SCS
Ethernet RJ45
Five provided
Four provided
Four provided
Four provided
Fiber (M.M, ST)
N/A
N/A
One provided
N/A
Fiber (M.M, SC)
N/A
One provided
N/A
N/A
Fiber (S.M, SC)
N/A
N/A
N/A
One provided
where (X) can be T or a blank. The T designates the ambient range of -40 °C to +75 °C. Blank represents the ambient range of -10 °C to
+60 °C.
Note: S.M. - Single mode fiber
M.M. - Multi mode fiber
SC – SC fiber connector
ST – ST fiber connector
Temperature range:
The relation between ambient temperature and the assigned temperature class is as follows:
Series
Ambient temperature
range
Temperature class
IE-SW-BL08(X)-7TX-1SCS, IE-SW-
BL08(X)-7TX-1SC, IE-SW-BL08(X)-7TX-
1ST, IE-SW-BL08(X)-8TX, IE-SW-
BL08(X)-6TX-2SC, IE-SW-BL08(X)-6TX-
2ST, IE-SW-BL08(X)-6TX-2SCS, IE-
SW-BL05(X)-5TX, IE-SW-BL05(X)-4TX-
1SC, IE-SW-BL05(X)-4TX-1ST and IE-
SW-BL05(X)-4TX-1SCS
(X) is T
-40 °C to +75 °C
T4
(X) is blank
-10 °C to +60 °C
T4