User Documentation

Version 1.2 / August 2020 Page 98 / 102
7. Enter the IP address of the Router to field “Host”
Note: You can enter either the IP address of LAN or WAN port. The import fact is that the Routers IP ad-
dress is accessible by the Wireshark-PC.
8. Enter into field “Port” the value 2002 (will be filled automatically if you enter an IP address)
9. Click button OK
Now both Interfaces of the Router (= Host 172.16.1.20) should be displayed.
10. Click button Close
The “remote capture interfaces” will be displayed in the list of selectable interfaces.