User Documentation

Version 1.2 / August 2020 Page 81 / 102
A5-1 Configuration of initial parameters
►Goto menu Configuration → IP configuration
Figure 17: IP configuration factory defaults
►Change operational mode to “Transparent bridge”.
• Router is now working in bridging mode on Layer 2 (Ethernet frames / MAC address based).
►Change LAN IP address as desired (in bridging mode only needed for Web access).
• In this example we use 192.168.99.178.
• If the Router shall be accessed also from another IP network please configure the default gateway. In
this example we use gateway address 192.168.99.1.
►Click “Apply Settings”
Figure 18: New IP configuration running as “Transparent bridge” (Layer 2)
Configuration of an individual system/device name (Optional step)
►Goto menu Configuration → General settings → System Data.
►Change “System name” according to your needs (e.g. related to your application / machine).
►Click “Apply Settings”.