User Documentation

Version 1.2 / August 2020 Page 8 / 102
1.5 Technical data
Operation mode
IP-Router
• IPv4-Routing between the interfaces (LAN ports / WAN port / optional
4G modem). LAN-Ports behave as unmanaged switch.
• Static or dynamic routing according to RIPv2 or OSPF protocol.
Network Services
• DHCP Server / DHCP Relay
• DNS-Relay
• NTP-Client
• DynDNS (DHCP-Client according to RFC 2136)
Firewall
• IPv4 Stateful inspection Firewall
• NAT-Masquerading, 1:1 NAT, Port forwarding
• Layer-2/3-Filter (VLAN ID, VLAN QoS Tag, MAC address based,
Ethertype Frame)
OpenVPN
• Configurable as OpenVPN server or client (Layer 2 and Layer 3)
• Authentication with X.509 Certificates
• Tunnel support via HTTP-Proxy
• A maximum of 10 different server configurations
• Unlimited number of client connections in server mode
IPsec
• Can be configured as an IPsec server or client.
• Authentication with PSK (user ID, password) or X.509 certificates.
• Hardware encryption for faster data flow rate.
• A maximum of 64 simultaneous connections (subnet with subnet or as
IPsec server)
• Encryption algorithms DES-56, 3DES-168, AES 128, AES 192, AES-
256
u-link
• Based on certificate-secured OpenVPN technology
• To be used with the Weidmüller Remote Access Service
• Simplifies VPN connections and management
• Fast and easy connections
• Free of charge
• Visit https://u-link.weidmueller.com for further information.