User Documentation

Version 1.2 / August 2020 Page 70 / 102
Operational mode:
IP Router
IP address parameters WAN Port:
Static
192.168.20.254
255.255.255.0 (Class C)
NAT (masquerading) SET
IP address parameters LAN Port:
Static
192.168.10.254
255.255.255.0 (Class C)
NAT (masquerading) NOT SET
Default gateway
Can be left blank because there exists no further
target network
► Click button “Apply settings” to activate the new settings.
Now the configured parameters will be activated (but not saved). After a few seconds the web interface dis-
plays the new IP addresses. Please keep in mind that you have lost the Router connection due to changing
the IP address range of your connected LAN port.
5. Change the IP address of the configuration PC according to connected network 192.168.10.0 / 24
► To reconnect to the Router now set the IP address of the PC to the new values
IP address: 192.168.10.99
Subnet mask: 255.255.255.0
Standard-Gateway: 192.168.10.254
6. Again login into the Web interface of the Router using a Web browser
Use IP address 192.168.10.254 (http://192.168.10.254) on LAN port
User: admin
Password: Detmold
7. Verify that configured parameters are valid
► Select menu Configuration → IP configuration
8. Configuring the accessibility of devices C and D of hidden network 1
► Select menu Configuration → Forwarding