User Documentation

Version 1.2 / August 2020 Page 69 / 102
Network diagram of below described application scenario
How to configure the Router
Starting situation
The Router is set with factory default values and can be accessed either using the LAN port by IP address
192.168.1.110 or using the WAN port by IP address 192.168.2.110.
1. Connect the configuration PC to the Router using the LAN Port (this port will be used in the example).
Note: Use autonegotiation on the Ethernet Interface of the PC
2. Change the IP address of the PC to one of the range 192.168.1.0 / 24
→ e.g. IP address 192.168.1.99
Subnet mask 255.255.255.0
Standard gateway can be left blank due to direct cable connection
3. Start a Web browser and login into the Web Interface of Router (http://192.168.1.110)
User: admin
Password: Detmold
4. Set the basic IP configuration and activate NAT masquerading
► Select menu Configuration → IP configuration
► Configure the menu entries as below described