User Documentation

Version 1.2 / August 2020 Page 67 / 102
Now the configuration of the Router is finished!
Testing the accessibility between Ethernet Devices of both networks
1. Run 3 Ping commands from a device of Ethernet network 1 (192.168.10.0/24) using below described ad-
dresses (members of network 2)
→ ping 192.168.20.100
→ ping 192.168.20.101
→ ping 192.168.20.102
Result: All sent “pings” should be answered by the requested IP addresses correctly.
2. Run 3 Ping commands from a device of Ethernet network 2 (192.168.20.0/24) using below described ad-
dresses (members of network 1)
→ ping 192.168.10.100
→ ping 192.168.10.101
→ ping 192.168.10.102
Result: All sent “pings” should be answered by the requested IP addresses correctly.
Note
1. If you perform the ping test using PC’s please check your firewall configuration to en-
sure that ping re-quests and echoes are allowed.
2. Keep in mind that every device which will be used for ping testing needs an entry for the
standard gate-way (IP address is pointing to the Router of the PC’s network)