User Documentation

Version 1.2 / August 2020 Page 64 / 102
5. Appendix A (Configuration examples)
A1 – Basic Router configuration to connect 2 networks with different IP
address ranges
Application requirements:
There are 2 industrial Ethernet networks which shall be connected by the Router. Each network has its own
IP address range. Each Ethernet node of both networks shall have the possibility to communicate with each
other.
This application can be done with all router models. No special firewall filter rules shall be configured.
In this example the IP address ranges are set to
192.168.10.0 / 255.255.255.0 for Network 1 and
192.168.20.0 / 255.255.255.0 for Network 2
The Router interfaces will be set to
192.168.10.254 / 255.255.255.0 for LAN interface and
192.168.20.254 / 255.255.255.0 for WAN interface
Network diagram of below described application scenario