User Documentation

Version 1.2 / August 2020 Page 40 / 102
Network → IP Routing (Tab Configuration)
Menu
Configuration → Network → IP Routing → Tab „Configuration“
Function
Registration of static IP routes and activating/deactivating of dynamic routing. For dynamic
routing, both can be selected the RIP and the OSPF protocol. Please note that dynamic
routing can be set per interface. Cellular routers, or routers in extended routing mode, will
have more interfaces to define dynamic routing.
Up to 20 static IP routes can be configured.
Dynamic Routing
Type:
Which routing protocol should be used on this interface.
- RIP the Routing Information Protocol is frequently used and helps
routers to dynamically adapt to changes
- OSPF Open Shortest Path First is newer and mage RIP obsolete
- Both Select this if you want to use both protocols at a time
Dynamic Routing
Simple Pass-
word
This field is optional. The OSPF/RIP simple password authentication will
protect all packets with this password. Note that this password will be
send as clear text! It is only meant to prevent misconfigured routers to be
placed on the network.
Dynamic Routing
Active inter-
face
RIP: Mark the checkbox to send advertisements on this interface. If the
checkbox is left empty, the interface will only listen for incoming advertise-
ment and it will be included in advertisement on other active interfaces.
OSPF: Enable OSPF on this interface. IF the checkbox is not marked the
interface will be included in advertisements on other active interfaces.
Other than RIP it will not even listen for incoming advertisements.
Dynamic Routing
Redistribute
static routes
When enabled: redistribute all static routes with OSPF and RIP. Note: the
metric of the static table will not be used.
Dynamic Routing
Log level
None
Will log no messages through the Event Log.
Info
Log only some information and critical errors.
Debug
Log state information too.
Verbose
Log all possible messages