User Documentation

Version 1.2 / August 2020 Page 34 / 102
Menu
Configuration → General settings → Date & time
Function
Setting of date, time and time zone. Alternatively, the date/time setting can be configured
using the "Network Time Protocol" NTP and accessing an external NTP server.
When NTP time server relay is activated, the device will be act as a NTP time server for
other services.
Note
1. The Router has no battery-buffered, but a capacity-buffered system clock.
2. General behavior of date/time settings:
3. During operation the Router will save its current date/time (either based on manual
input or by NTP update) each hour into the flash memory. After next power-up the
Router will restore the internal system clock with the date/time value last saved into
the flash memory. If no NTP update is enabled then the system clock will run based
on the last stored date/time.
Date & Time → Tab State
Menu
Configuration → General settings → Date & time → Tab “State”
Function
Shows the states of the used NTP servers.
Please use tooltips for further information.