User Documentation

Version 1.2 / August 2020 Page 25 / 102
Example of result of a ping test:
4.1.8 Diagnostics → Remote capture
Menu
Diagnostics → Remote capture
Function
By using the "remote capture" function data packets on both the LAN and the WAN port of
the Router can be recorded for diagnostic purposes. The receiver of the diagnostic data is a
PC/Server which must have installed the tool "Wireshark" listening on Port 2002.
How to use please refer to application note in Appendix A.
Enable remote capture server
Enables the function
Client address
IP address of permitted remote capture client (e.g. your
service pc)
Verbose logging
By default only access violations are logged (wrong client
IP address or second connection attempt). With this op-
tion information about connections and requests are also
logged.
Note
No authentication is possible for remote capture. Therefore, this feature should only
be activated for a limited time during diagnosis.