User Documentation

- 32 -
7.1.3.4 Maintenance Settings  Load Factory Default
Via menu item Load Factory Default the Modbus Gateway can be reset to Factory default values.
By activating the checkbox the current IP address will not be changed when clicking button Activate. If
the checkbox is cleared then also the IP address will be reset to factory default IP 192.168.1.110.
7.1.3.5 Maintenance Settings  Change Password
Via this menu item a password can be set or cleared to ensure an authorized access to the device. A
set password controls the access by Webinterface, Telnet console or PC-based utility Modbus
Gateway Administrator.