User Documentation

- 29 -
7.1.2.5 Advanced Settings  Miscellaneous
This menu item provides settings for
Warning functionality using the built-in relay
Behaviour of external Reset Button and
Access to Webinterface and Telnet console.
Auto Relay Warning Functions
The built-in relay can be used for warnings based on following trigger events:
Power failure
No link or link down of Ethernet port 1
No link or link down of Ethernet port 2
Conditions of relay: Open when Power-off or when a relay-based alarm is triggered
Closed when Power-on and no relay-based alarm is triggered
When a checked trigger condition occurs the Ready-LED 
green to red and starts flashing.
Console Settings Functions
Checkbox Reset Button Protect  Activating the checkbox prevents to reset the Gateway to
Factory default values by the external reset button. By default
the checkbox is not set to allow a reset to Factory defaults.
Checkbox Telnet Console  Allows or prevents the device access by Telnet (Default
enabled)
Checkbox Web Console  Allows or prevents the device access by Webinterface (Default
enabled)