User Documentation

- 20 -
7.1.1.3 Basic Settings  Serial
The menu item Serial is where the 
configure Baud Rate, Parity, Stop Bit, Flow Control, FIFO and Interface Mode.
Serial parameter settings
Parameter
Value
Interface Mode
RS-232
RS-422
RS-485, 2-wire
RS-485, 4-wire
Baud Rate
50 bps to 961200 bps
Parity
None, Odd, Even, Space, Mark
Stop Bits
1, 2
Flow Control
None, Xon/Xoff, RTS/CTS, RTS Toggle
UART FIFO
Enable, Disable
RTS On Delay
0 to 100 ms
RTS Off Delay
0 to 100 ms