User Documentation
- 19 -
7.1.1.2 Basic Settings Network
The Network configuration allows users to configure the Ethernet network parameters.
Network parameter settings
Setting
Description
Factory Default
IP Configuration
Static
unit's
default IP address 192.168.1.110
Static
DHCP
The Gatewayassigned automatically by the
DHCP/BOOTP
BootP
IP Parameters
IP address
Identifies the Modbus Gateway on a TCP/IP network.
192.168.1.110
Subnet mask
Identifies the type of network to which the Modbus Gateway is
connected (e.g., 255.255.0.0 for a Class B network, or
255.255.255.0 for a Class C network).
255.255.255.0
Gateway
The IP address of the router that connects the LAN to an outside
network.
None
DNS1
address)
The IP address of the DNS Server used by your network. After
entering the DNS Server's IP address, you can input the
Gateway's URL in your browser's address field, instead of
entering the IP address.
None
DNS2
address)
The IP address of the DNS Server used by your network. The
Gateway will try to locate the 2nd DNS Server if the 1st DNS
Server fails to connect.
None