User Documentation

ManualsBrandsWeidmueller ManualsAutomation & SoftwareIE-CST-2TX-1RS232/485

Serial/Ethernet Converter

IE-CS-2TX-1RS232/485

IE-CST-2TX-1RS232/485

IE-CS-2TX-2RS232/485

IE-CST-2TX-2RS232/485

Hardware Installation Guide

Second Edition, August 2016

1243440000/01/08.16

Please note:

This document, the detailed manual and any further

product information - if available - can be downloaded at

the internet link:

http://www.weidmueller.com/downloads

 For manual select <Print Media> then goto

Section <Industrial Ethernet>

 For SE-Converter Administration Software,

Windows Com-Port driver or Firmware Update

select <Software> then goto Section <Industrial

Ethernet>

Reproduction without permission is prohibited.

Summary of content (9 pages)

PAGE 1
Serial/Ethernet Converter IE-CS-2TX-1RS232/485 IE-CST-2TX-1RS232/485 IE-CS-2TX-2RS232/485 IE-CST-2TX-2RS232/485 Hardware Installation Guide Second Edition, August 2016 1243440000/01/08.16 Please note: This document, the detailed manual and any further product information - if available - can be downloaded at the internet link: http://www.weidmueller.
PAGE 2
1. Overview The Serial/Ethernet converters from Weidmüller deliver easy and reliable serial-to-Ethernet connectivity for the industrial automation market. The converters support several operation modes - TCP Server, TCP Client, UDP, Real COM, RFC2217, RTelnet, Pair Connection, and Ethernet Modem - ensuring the compatibility of network software, and are an ideal choice for connecting RS-232/422/485 serial devices, such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. 2.
PAGE 3
Appearance of the IE-CS(T)-2TX-1RS232/485 Appearance of the IE-CS(T)-2TX-2RS232/485 Reset to factory settings To load the factory default settings depress the reset button for 5 continuous seconds. Use a pointed object, such as a straightened paper clip or toothpick, to depress the Reset button. This will cause the Ready LED to blink on and off. When the factory default settings are loaded then the Ready LED stops blinking (after about 5 seconds).
PAGE 4
Serial/Ethernet Converter LED Indicators (front panel) Name Color PWR1, PWR2 Red Red Ready green E1, E2 off orange green off orange P1, P2 Function Power is being supplied to power input PWR1 or PWR2 Steady on: Power is on and the Serial/Ethernet Converter is booting up. Blinking: Indicates an IP conflict, the DHCP or BOOTP server did not respond properly, or a relay output occurred. Steady on: Power is on and the Serial/Ethernet Converter is functioning normally.
PAGE 5
. Software Installation Information Install the Weidmüller SE-Converter Administration tool either from the software CD or download it from the Weidmüller website http://www.weidmueller.com/downloads. Once the installation window opens, click on the Installation button and follow the instructions on the screen. If you need detailed information about using the SE-Converter Administration, please take a look into the Online-Help of the software. 6.
PAGE 6
Pinouts of the Terminal Block (RS-422 / RS-485) PIN 1 2 3 4 5 RS-485 2-wire ----Data+(B) Data-(A) GND Female DB9 to Male DB9 SEConverter Female DB9 to Male DB25 SEConverter -6- RS-422/ RS-485 4-wire TxD+(B) TxD-(A) RxD+(B) RxD-(A) GND
PAGE 7
ATEX Information 1. 2. 3. 4. 5. Certificate number DEMKO 13 ATEX 1207259X Ambient range (-40°C ≤ Tamb ≤ 75°C) Certification string (Ex nA nC IIC T3 Gc) Standards covered (EN 60079-0:2012+A11:2013, EN 60079-15:2010) The conditions of safe usage:  The Ethernet Communication Devices are to be mounted in an IP54 enclosure and used in an area of not more than pollution degree 2 as defined by IEC60664-1.
PAGE 8
SW 1 2 3 Pull-low resistor Terminator ON Pull-high resistor 1KΩ 1KΩ 120 Ω OFF 150 K Ω 1) 150 K Ω 1) --- 1) 1) Default 8. Specifications Power requirements IE-CS(T)-2TX-1RS232/485: 12 to 48 VDC, 220 mA@12 VDC; 110 mA@24VDC IE-CS(T)-2TX-2RS232/485: 12 to 48 VDC, 250 mA@12 VDC; 125 mA@24VDC Operating temp. 0 to 60°C (32 to 140°F) for standard models -40 to 75 ºC (-40 to 167 ºF) for extended temperature models Operating humidity 5 to 95% RH Dimensions 36 x 105 x 140 mm (W×D×H) 1.42 x 41.
PAGE 9
Weidmüller gives a 5 year warranty on this product in accordance with the warranty terms as described in the general conditions of sale of the Weidmüller company which has sold the products to you. Weidmüller warrants to you that such products the defects of which have already existed at the time when the risk passed will be repaired by Weidmüller free of charge or that Weidmüller will provide a new, functionally equivalent product to replace the defective one.