User Documentation

IE-CS(T)-2TX-xRS232/485 Web Console Configuration
5-30
Each of the IE-CS(T)-2TX-xRS232/485’s serial ports is mapped to a TCP port. To avoid conflicts with common
TCP port numbers, set port numbers to 4001 for port 1, 4002 for port 2, etc.
Map <CR-LF>
Setting Factory Default Necessity
CR, LF, or CR-LF CR-LF Required
If data received through the IE-CS(T)-2TX-xRS232/485’s Ethernet port is sent using the “enter” command, the
data will be transmitted out the serial port with an added
“carriage return + line feed” if you select the <CR-LF> option
(i.e., the cursor will jump to the next line, and return to the first character of the line)
“carriage return” if you select the <CR> option
(i.e., the cursor will return to the first character of the line)
“line feed” if you select the <LF> option.
(i.e., the cursor will jump to the next line, but not move horizontally)
Disabled Mode
When Operation mode is set to Disabled, that particular port will be disabled. Check the “Apply the above
settings to all serial ports” to apply this setting to the other port.