User Documentation

2583070000/00/04.201840
8 Troubleshooting
If a fault cannot be resolved by means of the ac-
tions described here, please refer to Weidmüller
Service.
8.1 Fault table
Fault Possible cause Recommended action
Machine cannot be
switched on.
No power supply ► Check the power cable and the mains con-
nections.
► Check fuses.
Increased scrap Cutting blade damaged or blunt. ► Replace the blade (see section 8.3).
Setting shifted ► Check the setting.
Length deviation Worn toothed belt ► Replace the toothed belt.
Slip ► Perform a slip correction
(see section 5.13).
Motor blocked. Cable feed sluggish ► Check the cable feed.
► Adjust the speed of the cable feed.
8.2 Wear parts
Product Order no.
Cutting blade (set) 9054740000
Double-sided toothed belt 9054750000
Toothed belt (motor) 9054760000