User Documentation

232583070000/00/04.2018
Contents
1 About this documentation 24
2 General safety notes 25
2.1 Intended use 25
2.2 Processable material 25
2.3 Safety equipment 25
2.4 Personnel 25
3 Device description 26
3.1 Technical data 27
3.2 Type plate 27
4 Transporting and setting up the machine 28
4.1 Installation location 28
4.2 Transporting the machine 28
4.3 Unpacking the delivery 28
4.4 Scope of delivery 28
4.5 Establishing connections 28
5 Setting up the machine 29
5.1 Registering as an installer or technician 29
5.2 Changing language 29
5.3 Available program positions 29
5.4 Loading production data into machine 30
5.5 Use of wiring data 30
5.6 Changing the production program 30
5.7 Setting the short program 30
5.8 Resetting the daily piece quantity 31
5.9 Setting cable monitoring function 31
5.10 Setting the zero-overlap cut 31
5.11 Setting the program start 31
5.12 Setting the start-up speed 31
5.13 Setting the length correction function 31
5.14 Programming structure 32
6 Operating the machine 33
6.1 Using the touch-screen 33
6.2 Select program 33
6.3 Quick start program 34
6.4 Processing wires 34
6.5 Modifying the feed speed 34
6.6 Service display 34
6.7 Emergency stop 34
6.8 Switching off the machine 34
6.9 WI Manager 35
7 Cleaning and maintaining the machine 37
7.1 Cleaning the machine externally 37
7.2 Machine maintenance 37
7.3 Maintenance schedule 38
7.4 Cleaning rollers 39
7.5 Clean cutting area 39
7.6 Cleaning the interior 39
7.7 Replace toothed belt 39
8 Troubleshooting 40
8.1 Fault table 40
8.2 Wear parts 40
8.3 Replacing cutting blades 41
8.4 Replacing the fuses 41
9 Taking the machine out of operation and
disposing of it 42
9.1 Taking the machine out of operation 42
9.2 Disposing of the machine 42
APPENDIX
Electrical connection layout 44
Declaration of conformity 45