User Documentation

Cleaning and maintaining the machine
2549630000/00/09.201742
7.9 Cleaning the interior
► Only RS: Remove the waste container.
► Clean the inside of the machine with a brush and, if nec-
essary, with a vacuum cleaner.
Never use compressed air for cleaning the in-
side, because otherwise small parts (e.g. strip-
ping residues) become inaccessible on the inside
of the machine. This may result in malfunctions
and operational stoppages.
7.10 Servicing the maintenance unit
1
Figure 7.7 Tool slide
Quarterly
► Pull the stranded wire xing unit forwards.
► Lubricate the contact surface (1).
► Bring the stranded wire xing unit back into position.
7.11 Servicing the compressed air mainte-
nance unit
CAUTION
Risk of injury posed by electrical volt-
age!
► Make sure that the machine is switched o󰀨
and the mains plug has been pulled.
CAUTION
Risk of injury posed by compressed air
hoses swinging around!
► Make sure that the compressed air hose
is disconnected from the compressed air
source.
1
2
3
Figure 7.8 Compressed air maintenance unit
As required
► To drain the condensate press the drain plug (1) up-
wards.
► To change the lter, unscrew the condensate tank (2)
and screw o󰀨 the lter (3).
► Insert a new lter and screw the condensate tank back
on tightly.