User Documentation
372549630000/00/09.2017
Operating the machine
6.7 Set language
► Select Menu 10.
► To activate the menu, press E.
10. Language
---------------------------
C E
► Press
until the desired language is displayed.
The selected language is adopted immediately.
► To reach the production menu again, press C, or choose
another menu with the arrow keys.
6.8 Service display
1. Production menu
Ready Device is ready for operation
––– Service ––– Service display appears after
every 400,000 work cycles.
Step: 2/0
C E
When the machine is switched on, the service display
ashes three times. After that the machine is ready for op-
eration.
To maintain the machine's performance capa-
bility for as long as possible, you should keep to
the service intervals specied.
– Small service after 400,000 work cycles
– Big service after 800,000 work cycles
Refer to the Weidmüller representative respon-
sible for your country.
6.9 Switching off the machine
► Switch the machine o.
The valves are audibly relieved. The display goes out.
Only RS: When you nish the work, you should
empty the waste container and put it back into
the machine (see section 7.4).