User Documentation

252549630000/00/09.2017
Contents
1 About this documentation 26
2 General safety notes 27
2.1 Intended use 27
2.2 Material that can be processed and crimping shape 27
2.3 Safety equipment 27
2.4 Personnel 27
3 Device description 28
3.1 Technical data 30
3.2 Type plate 30
4 Transporting and setting up the machine 31
4.1 Installation location 31
4.2 Transporting the machine 31
4.3 Unpacking the delivery 31
4.4 Scope of delivery 31
4.5 Establishing connections 31
5 Setting up the machine 32
5.1 Inserting wire-end ferrules 32
5.2 Changing the wire-end ferrule reel 33
5.3 Setting the stripping length (only RS) 33
5.4 Performing a stripping test 34
5.5 Setting the cutting depth 34
6 Operating the machine 35
6.1 Normal operation 35
6.2 Inserting the wire 35
6.3 Touch display and operating menus 35
6.4 Resetting the day's piece quantity 36
6.5 Changing operating mode 36
6.6 Displaying counters and processing times 36
6.7 Set language 37
6.8 Service display 37
6.9 Switching off the machine 37
7 Cleaning and maintaining the machine 38
7.1 Cleaningthemachineexternally 38
7.2 Machine maintenance 38
7.3 Maintenance schedule 39
7.4 Emptying waste container (only RS) 40
7.5 Cleaning wire-holding tongs 40
7.6 Servicingthestrandedwirexingunit 40
7.7 Servicing the stripping unit 41
7.8 Servicing the crimping tool 41
7.9 Cleaning the interior 42
7.10 Servicing the maintenance unit 42
7.11 Servicing the compressed air maintenance unit 42
8 Troubleshooting 43
8.1 Fault table 43
8.2 Wear parts 43
8.3 Replacing the stripping blade 44
8.4 Replacing fuses 44
9 Taking the machine out of operation and disposing
of it 45
9.1 Taking the machine out of operation 45
9.2 Disposing of the machine 45
APPENDIX
Electro connection layout 290
Pneumatic connection diagram 291
Declaration of conformity 292
Manufacturer
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
T [phone]
F [phone]
www.weidmueller.com
Document no. 2549630000
Revision 00/September 2017