User Documentation

Cleaning and maintaining the machine
2583060000/00/03.201840
7.4 Emptying the waste container
Depending on the thickness of the stripped material, the
waste container should be emptied after every 2,000 to
6,000 cycles. The waste container must also be emptied
prior to each instance of transport or shipping.
► Pull out the waste container and empty it.
► Re-insert the waste container.
7.5 Servicing the wire-holding tongs
► Clean the wire-holding tongs with a brush.
Additional monthly maintenance:
► Oil the wire-holding tongs at the rotation points (1) and
at the contact areas (2) of the rollers.
1
2
Figure 7.2 Wire-holding tongs
7.6 Servicing the stranded wire xing unit
1
A B
2
3
4
Figure 7.3 Stranded wire fixing unit in operating position (A) and
pulled forward (B)
► Clean the insertion funnel (1) with a brush.
► If necessary, use a soft cloth and some spirit.
Additional monthly maintenance:
► Pull the stranded wire xing unit forwards (Figure 7.3,
B).
► Check whether the rollers (2) are able to move freely. If
necessary, lubricate the rotation points of the rollers.
► Oil the rotation points (3) of the stranded wire xing unit.