User Documentation
392518100000/03/06.2017
Operating the machine
6.4 Resetting the day's piece quantity
► Select Menu 1, if it is not already displayed.
1. Production menu
ready VC: 25% Device ready for operation, vi-
brating conveyor 25% (default)
d-pcs 5 Day's piece quantity: Quantity of
processed pieces since the last
reset.
step: 1/0
C E
► To reset the day's piece quantity, hold down C for at
least 5 seconds.
The day's piece quantity is reset to zero.
6.5 Modifying the vibrating conveyor output
► Select Menu 2.
► To activate the menu, press E.
2. VC select menu
Power VC: 25% Current vibrating conveyor output
Temp: 29° VC: 0 Device's internal temperature
SF+=
SF–=
C E
► To increase the output, press
as often as necessary,
and then E immediately afterwards.
► To decrease the output, press
as often as necessary,
and then E immediately afterwards.
The modied values are adopted.
► To reach the production menu again, press C, or choose
another menu with the arrow keys.
6.6 Changing operating mode
► Select Menu 3.
The current operating mode is displayed.
3. stripping menu
stripping: 0 0 = Stripping and crimping
1 = Only stripping
C E
► To switch operating mode, press E.
The selected operating mode is immediately active.
► To reach the production menu again, press C, or choose
another menu with the arrow keys.
6.7 Displaying counters and processing
times
► Select Menu 4.
4. plant data menu
tcounter: 400002 Total counter: Number of com-
pleted work cycles
cycle: 1.496s Processing time: Work cycle du-
ration (stripping and crimping)
Service: – 1 Prex sign and service counter
C E
The total counter counts the work cycles during the entire
lifetime of the machine.
The service interval of the machine is 400,000 work cycles.
The service counter counts down instead of up; starting at
400,000. Once 400,000 work cycles have been completed,
the service counter stands at 0. When the machine is next
started, the service notication is displayed (see section
6.9). The service counter counts up again. The negative
prex sign indicates that a counting cycle has been com-
pleted. The service technician sets the service counter to
400,000.