User Documentation

Troubleshooting
2516390000/03/07.201848
8.2 Errormessages
Display Possiblecause Recommended action
v v
The ferrule was not well processed and blocks the
mechanics.
► Remove the ferrule (see section 8.6).
v v
Triggering mechanism actuated too briey. The
machine does not start
► Press touch display briey.
► Insert the wire deeper.
v v
Triggering mechanism actuated but wire was re-
moved too quickly
► Press touch display briey.
► Check the quality of the crimp.
v v
Front ap is open.
► Close front ap.
v v
Stop switch fault.
– Stop switch does not stop.
– Stop switch is not pressed.
► Press touch display briey.
v v
Start switch fault
– Start switch not free.
► Press touch display briey
► Check the start switch for blockage.
The wire was inserted too early
► Insert the wire later
v v
Motor fault
– Motor not running or motor jammed
– Filling level monitoring S1 addressed too
briey.
► Press touch display briey
► Insert the connector slower.
v
Servicing message
– Piece quantity for servicing reached.
► Send machine in for servicing.
v
Drum position incorrect.
► Correct drum position. Inching mode.
v
Setting faults
– Stripping grade and die size do not match.
► Press touch display briey.
v v
Machine not in start position.
► Move to start position. Inching mode.